HOME CMS PRODUCTS MANUFACTRURE CUSTOMER SUPPORT SP SERVICE AGENT VIDEO CERTIFICATE CONTACT US CHINESE
POSITION: Home -> Products -> Long-distance Alarm -> Long Distance Dual Network Alarm System with 8/16 Wired zone and 99 Wireless Zone

Product Name:  Long Distance Dual Network Alarm System with 8/16 Wired zone and 99 Wireless Zone   Hot
Name:   Long Distance Dual Network Alarm System with 8/16 Wired zone and 99 Wireless Zone Model: SSG-GSM/TEL-8/16-FM 
Attestation: CCC,CE,ROHS Type: Long-distance Alarm 
Description:
  1.LED display, with keypad on the panel
2. Anti-tampering function:When the main control panel is removed or shaken from the wall, it will emit a high decible voice alert and auto dial the preset phone numbers at the same times.
3.Learning code: It can work with different sensors and the user can easily add and remove the sensors
4.Compatible with wired and wireless sensors: The panel has 99 wireless zones, 8/16 wired zones. It can use with sensors like PIR Motion Sensor, IR Beams, Smoke Detector, Gas Detector, Panic Buttons and so on.
5.The system can use with External Siren, no build-in siren
6.Great user-friendly design , easy for wiring
7. Low-power alert Function: If the system was use with Central Monitoring Station, the panel will also send this message to the Central Monitoring Station. While if there is no Central Monitoring Station, the system do not have this function
8. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there is no voice instruction.
9.Remote control:If the system do not alarm, the user can remote control the system to arm/disarm on phone after inputing correct password.When alarm, the system will send message to Central Monitoring Station first, then auto dial the preset phone numbers. Once the alarm phone has been connected, the system will alert the alarm to user, what′ more, the user can also remote control the system to arm/disarm on phone at that time
10.Back-up battery: When the AC power is cut, the system can continue to work because it will turn on the backup battery automatically. And when the backup battery lack of power, the panel will charge for it.
11.The system can work wit SSG Central Monitoring Station through GPRS. And the TTS Voice Module of the Central Monitoring Station will Alert the user which zone alarm.
12.Great lighting protection design
13.Great customized design
14.Private alarm monitoring: Alarm monitoring without central plarform(That means the user set the number by himself and the alarm message will be handled by his friends or neighbour ) . The system will autodial the alarm phone by PSTN Network.
15.we use high-quality,professional,industrial GSM module to disign and make our products.
16.Listen-in Function: After input correct password, the owner can hear the spot voice clearly. And the user can remotely prolong or cut listen-in on phone. What′s more the user can disarm the system during listen in.
17.On the remote controller, the user can arm/disarm the system and do emergency calling. It is very convinient for the user.
18. The panel has wired siren connection port and the user can set sound/mute Alarm for the system
19.Inteilligient control system to check that whether the user has handled and confirmed the alarm. After confirmed, the system will not dial the pone numbers.
20.DC/AC power auto switch: charging by AC power , switch to DC power if AC power cut to make system no fail. the whole system can be used to prevented against burglar,robber,fire,etc.
21.The system can use with the electronic board to indicate the arm/disarm/alarm state to deterrent the intruder
22.The system is compatible with SSG Wireless Doorway Keypad.
23.The System can use with SSG Central Monitoring Station, Support Contact ID
Parameter:  
1.The Dimension of the Plastic Shell: 27*26.6*8CM
2. The Dimension of the Metal Shell: 27*26.6*8CM3. Power Adaptor: AC To DV conventor.
4. Input: AC 220( AC 110V/240V is optional,
5. output:9VDC500mA.
6. Standby Current: ≤20mA Alarm State Current: ≤200mA
7. Working Condition: Indoor, temperature: -10 ~ 50 degree, Relative humidity;≤90% atmospheric pressure: 86 ~106Kpa
8. Alarm Receiving Mode: AM and FM.
AM Receiving Distance:≥120M (In the open area)
FM Receiving Distance: ≥1800M (In the open area)
9. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there is no voice instruction.)
10. Preset Phone Numbers: 6 Group (Maximum 30 digits for each group))
11. External Siren: ≥110dB, No Built-in Siren
12. Frequency: 315MHz/433MHz.
13. Dual voice frequency dialing with single frequency current:
circle current 80mA 35mA 18mA ,
high frequency -7dBM+3dB-7dBM-5dB -7dBM+-3dB -7dBM+5dB-7dBM3dB , low frequency -9dBM+3dB-9dBM-5dB -9dBM+-3dB -9dBM+5dB-9dBM-3dB8 , high-low frequency gap: 2+-1dB , frequency gap: <+-1.5%
14.Protocol for CMS:Contact ID
Situation:

The biggest selling point: Normally speaking, user tend to use shot-distance remote controller or control panel to operate alarm system, However, some users need installing accessories far way from control panel, sometimes, the distance between control panel and accessories can reach to 1000 meters or more, So the signal transmitting distance should reach to nearly 2000 meters. Our FM alarm system is designed for this demand. This point is very important to installation.
Our FM alarm systems get two modules as follows:
AM (amplitude modulation) signal receiving and sending module, FM (Frequency modulation), with these two modules, the alarm system can receive signal 2-3 kilometers away, and signal within 2 kilometers. It not only helps control panel receive long-distance alarms, but also save the trouble of installing wired accessories and reduce the cost of installation.  
Because our alarm system can receive AM alarm signal and FM alarm signal, so user can choose suitable accessories according to his/her situation. We can use the lowest cost get the best state. You know the price of FM alarm accessories is 10 times higher than AM alarm accessories, if you can use AM accessories, why do you use AM alarm accessories???
There are 3 kinds super gain antenna which can receive signal from different distance. 
Standard antenna: 500Meters 
SA-FMTX01 : 1800 Meters
SA-FMTX02:  2500Meters
Environment friendly battery: Li-battery, can last for nearly 2 year per time. If you find there is a low battery, you can recharge it by yourself with our battery charger, it can last for another 2 year again. 
The functions of our GSM alarm system are powerful. It is one of the best sale products. 
Fashionable design:
Introduction about antennas

FM outdoor high power, high sensitivity antenna.: SA-FMTX01

Function introduction:
Configuration: 1 antenna with 30 meters long signal wire. The transmitting distance between all SSG FM alarm control panels and alarm accessories can reach to 1500 meters long in open air with no obstacle. While the reality is that there are always some obstacles surrounding control panel, like house, tree and so on. So the transmitting distance in this situation will be shortened to 500 meters. In order to overcome the limit of transmitting distance, you can use SA-FMTX01 with the control panel. Notice: please install this antenna outside, it should be stalled as high as possible. So the transmitting distance can reach as far as 1800 meters, even there are some obstacles surrounding the control panel. Of course, this parameter is not accurate 100%, after all some situations are really complicated. So what we suggest is installing the control panel correctly, Less obstacles, longer distance.     
Notice: This antenna can work with all FM alarm systems from SSG. Its signal transmitting distance can reach to as far as 1.8 killo meters. 
Model: Super gain FM antenna, SA-FMTX02

Configuration: 1 antenna with 20 meters long signal wire. Compared with SA-FMTX01, this antenna get a more sensitive signal, the signal covering can reach to more than 2000 meters with obstacle surrounding, more than 3 killo meters in open air. 
Notice: please install this antenna outside, it should be stalled as high as possible. So the transmitting distance can reach as far as 2000 meters, even there are some obstacles surrounding the control panel. Of course, this parameter is not accurate 100%, after all some situations are really complicated. So what we suggest is installing the control panel correctly, Less obstacles, longer distance.   
Notice: This antenna can work with all FM alarm systems from SSG. Its signal transmitting distance can reach to as far as 2.5 killo meters. 
Because this antenna shell is made from glass, its height is 4 meters, so it is convenient for us to deliver, we don??t recommend you to use it. Normally, this antenna is suitable to some special places like prison, farm, villa community and so on. The best way to ship it is by sea. 
Introduction about power charger (especially for FM door sensor and PIR sensor built-in Li battery): This charger is designed by ourself to charge accessories battery, when you find there is a low power in battery, please get the battery out of the accessories and charge it for 1.5-2.0 hours.
Introduction about remote controller: The remote controller we use now is average remote controller, we can use it to control host, the sending of signal is transmitted by AM, while the transmitting distance between FM alarm accessories and control panel will be 1500 M, they communicate with each other by FM frequency. 

GO BACK
HOME \ PRODUCTS \ SUPPORT \ MANUFACTRURE \ DEMO \  CONTACT Copyright 2006 © Shenzhen Security Group Corp.,Ltd.
All Rights Reserved.
五百万彩票 秒速时时彩 500万彩票 秒速时时彩 秒速时时彩 秒速时时彩 秒速时时彩 极速时时彩 500万彩票 秒速时时彩